Hoover nhl 3166z f3 fault

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Hoover nhl 3166z f3 fault

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • November 24, 2009 at 7:20 pm #50424
    Johnnyboy
    Participant

    Hi I have a hoover that wont spin, after 6 mins it flashes 3 times, drain problem. but i have changed the pressure switch and module as there is no water in the drum. Its as if it doesnt know its empty Drum rotation and brushes are ok and it abandons the diagnostic aarrrghhhh.
    Cheers
    Johnnyboy

    November 24, 2009 at 7:23 pm #304789
    BobHope
    Participant

    Re: Hoover nhl 3166z f3 fault

    hi Johnnyboy

    low insulation on heater or motor gives you this error its nothing to do with the drain or pressure systems.

    Bob.

    December 9, 2009 at 11:40 pm #304790
    Johnnyboy
    Participant

    Re: Hoover nhl 3166z f3 fault

    Bang on it was the element sorry for taking so long for thanking you. cheers Johnnyboy

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.