hoover oph714d/1-80

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › hoover oph714d/1-80

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • September 25, 2010 at 11:52 am #57482
    dealdd
    Participant

    this machine blew pcb. have checked for earth leakage and shorts and all ok so i ordered a new pcb and interlock to be on safe side.
    when fitted parts machine would not even turn on. has any one had this when changing boards.
    i put old pcb in and the machine switches on but just fills and pumps continously

    September 25, 2010 at 12:11 pm #331255
    allan73
    Participant

    Re: hoover oph714d/1-80

    Was the board pre-configured ?

    September 27, 2010 at 11:21 am #331256
    dealdd
    Participant

    Re: hoover oph714d/1-80

    yes this is the part number HVR49015449

    September 27, 2010 at 11:53 am #331257
    bzz67
    Participant

    Re: hoover oph714d/1-80

    tried to look up on gias but i cant see that exact model, the nearest i can find is OPH714D/2-80 or OPH714DS1-80.

    49015449 fits OPH714D/1 but dosnt show the -80 not sure if this matters.

    different part numbers for those others shown above, the one with ds in the model needs a date code as there are three different ones.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.