Hoover Optima WMH 147 DF non operational……..

[iadom]

Re: Hoover Optima WMH 147 DF non operational……..

I have seen worse, no harm in trying new brushes once the comm is cleaned up.

[mike30]

Re: Hoover Optima WMH 147 DF non operational……..

Thanks guys, polished commutator fitted new brush set then general clean up and test run machine now running as sweet as a sewing machine. By the way this machine was my daughters so she is now well pleased. Now moving on to my next job my Hoover dishwasher ??

Thanks,
Mike…………….

[mike30]

Re: Hoover Optima WMH 147 DF non operational……..

Thanks guys machine now running sound as a pound.

Thanks,
Mike

[John1961]

Re: Hoover Optima WMH 147 DF non operational……..

Hi,
I have a Haier motor HCD63/52a3 fitted to a Hoover HWB 814D-80S.
Where did you end up getting the brushes from?
Thanks, John.

[Martin]

Re: Hoover Optima WMH 147 DF non operational……..

John1961 wrote:I have a Haier motor HCD63/52a3 fitted to a Hoover HWB 814D-80S.
Where did you end up getting the brushes from?

The official Hoover part number for a MOTOR BRUSH UNIT (sold singular/not a pair) is 49028928. They describe is as fitting a “Haier/Ceset type motor” but stress the brushes for a Ceset motor ARE different. Search the Internet and even Hoover’s own spare parts site and you won’t find them listed. However if you search for Haier carbon brushes a whole plethora of choices await including THESE from Amazon.

Best of luck!

[iadom]

Re: Hoover Optima WMH 147 DF non operational……..

Did brushes in a Chinky Hoover with Haier motor yesterday. holders where not CESET type, more like Indesco.

I was able to remove the brush and metal holders from Hotpoint/Indesit C00035521 brushes and fit them into the original plastic holders.

[Martin]

Re: Hoover Optima WMH 147 DF non operational……..

Where they like the Qualtex CAR69’s Jim?

[iadom]

Re: Hoover Optima WMH 147 DF non operational……..

No the CAR69’s have the bog standard CESET plastic holders with the two big lugs either side.

[John1961]

Re: Hoover Optima WMH 147 DF non operational……..

I have ordered a pair from Ranson Spares, but had to call them as seems impossible to find online with anyone’s site!
They seemed sure they are the right ones for the Haier motor, but let’s see when they arrive.
Their part number was: RS123038
Will let you know if they fit.
Have got it running in the meantime by cleaning the commutator & and freeing up the brushes in the holders, about 5mm of carbon left !
John

[iadom]

Re: Hoover Optima WMH 147 DF non operational……..

John1961 wrote:I have ordered a pair from Ranson Spares, but had to call them as seems impossible to find online with anyone’s site!
They seemed sure they are the right ones for the Haier motor, but let’s see when they arrive.
Their part number was: RS123038
Will let you know if they fit.
Have got it running in the meantime by cleaning the commutator & and freeing up the brushes in the holders, about 5mm of carbon left !
John

That is a sure fire way to wreck the motor totally. :rolls:

[John1961]

Re: Hoover Optima WMH 147 DF non operational……..

No that will last about 2 months.
At that length they will not flip out.
New brushes here in two days!

[iadom]

Re: Hoover Optima WMH 147 DF non operational……..

John1961 wrote:No that will last about 2 months.
At that length they will not flip out.
New brushes here in two days!

Well I suppose my 46 + years experience must bow to your superior knowledge. 😀

[John1961]

Re: Hoover Optima WMH 147 DF non operational……..

Would like to know the logic be hide your view that it will be ‘Wacked’

Perhaps you use sand paper to clean your coms?

[iadom]

Re: Hoover Optima WMH 147 DF non operational……..

John1961 wrote:

Perhaps you use sand paper to clean your coms?

That sarcastic comment does not warrant a response. :rolls:

I was offering good advice which I’m sure would be backed up by all of my fellow trade members.

[John1961]

Re: Hoover Optima WMH 147 DF non operational……..

I would just like to understand your view that it wreck the motor.
You must have some reasoning for a statement like that?

If you have some constructive comments as to why it would do damage, then I think all would like to hear them.

[Author]

Posts