- This topic has 3 replies, 3 voices, and was last updated 15 years, 7 months ago by
.
-
Posts
-
Was wondering if anyone could help? Have got the above machine which when switched on and program selected the door locks itself, the door security light flashes before the start button is pressed and when you press start it makes no difference. The machine blew the trip before it stopped working. Have changed the door interlock but is still the same and did a visual check of the pcb but all looks ok there.
Any help would be great many thanksRe: Hoover VHD8142
Take a closer look at that pcb again if I were you! If the machine blew the trip something has caused that and the potential is that in doing so it blew a triac or other component on the board I reckon. 😉
Re: Hoover VHD8142
agree with martin follow wires on door lock back to the board and see which triac it goes to chances are it will be short circuit
Dave
- You must be logged in to reply to this topic.