Hoover WMH 168D

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Hoover WMH 168D

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • November 15, 2012 at 4:39 pm #72546
    rocker
    Participant

    when its put on spin it starts to rotate slowly but wont spin after only a few minutes the timer goes to stop, customer tells me the machine is about a year old !! is it likely to be the small rectifier pcb. (on floor back of machine)
    thanks John

    November 15, 2012 at 7:08 pm #384851
    BobHope
    Participant

    Re: Hoover WMH 168D

    check the heater for earth leakage as it causes this fault, or just disconnect it for quick est.

    Bob.

    November 15, 2012 at 8:53 pm #384852
    rocker
    Participant

    Re: Hoover WMH 168D

    Thanks Bob. John

    November 16, 2012 at 9:59 pm #384853
    larry
    Participant

    Re: Hoover WMH 168D

    If its of any help i had this fault a few weeks ago and it was the rectifier at the back of the machine. Not easy to spot but when i looked closely the one side of the large copper coil had broken its contact to the board so i resoldered it to the board and its been ok ever since.Larry.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.