Hoover WMH147DF/L-80

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Hoover WMH147DF/L-80

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • February 20, 2013 at 7:47 pm #74239
    silverbroom
    Participant

    Anyone know if this is a common problem? Over the past few months I have been to 2 Hoover w/m with drive belt cast off.

    Both are the plastic pulley type which worked loose, the one today (just over a year old) had snapped the retaining pulley bolt in the shaft.

    Just wondering if you guys have come across this in any quantity.

    silverbroom.

    February 21, 2013 at 8:28 am #390544
    Martin
    Participant

    Re: Hoover WMH147DF/L-80

    I haven’t personally but you will no doubt be thrilled to know (if you don’t already that is?) that the drum pulley is NOT available as a spare part. Only fitting a complete welded tub assembly (43000507) complete with pulley is the Gias way of doing things these days. :rolls:

    February 21, 2013 at 10:33 am #390545
    silverbroom
    Participant

    Re: Hoover WMH147DF/L-80

    Thanks for the reply Martin, have asked the customer to check if the machine came with the 5 years parts thingy as being the cheaper option.


    silverbroom

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.