hoTL 61 point dryer

[fasetester]

hi guys hotpoint aquries tumble dryer model TL61 makes a squecking sound when going what would cause this front bearings or jockey pully thanks fasetester. 🙂

[gandh1]

Re: hoTL 61 point dryer

either, or.

check both for damage.

just repaired a creda equiv of the 61 and that was bearings, but until you look you wont see…

[iadom]

Re: hoTL 61 point dryer

Jockey pulleys, rear bearing, brass earth strip at the back rubbing on the drum shaft ( a spot of grease stops this ) are the usual culprits.

[fasetester]

Re: hoTL 61 point dryer

thanks guys for your reply. i was repairing another appliance and he just said it was in the shed. it was late on and a lot of thing in front of it i thought that when i went back i would be prepared if the copper strip is worn throught does it not need to be replaced.

or was it the jocky pully if makeing a noise to put some grease on. is it a successful repair. putting the bearing kit in these dryers. not like the proline creda dryers. thanks fasetester 🙂

[Author]

Posts