Hotpoint aqualtis F02

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Hotpoint aqualtis F02

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • June 5, 2013 at 2:47 pm #75728
    pmb
    Participant

    Hi i have a AQXXF149PMUK showing f02 which is a motor fault. When i set the machine to a spin it pumps for a few minutes and then shows f02. The brushless motor checks out ok and the wiring is fine, i found a domed capacitor on the pcb which i changed but hasn’t helped. So i was wondering which is more likely the pcb or motor? i hardly ever see these machines so i am nervous about ordering a motor and getting stuck with it :help: . Thanks for any help Peter 🙂

    June 5, 2013 at 4:35 pm #395962
    madangler1
    Participant

    Re: Hotpoint aqualtis F02

    Pcb. Never ever changed on of the 3 phase motors.

    The best part of the machine 😉

    June 5, 2013 at 4:39 pm #395963
    pmb
    Participant

    Re: Hotpoint aqualtis F02

    😀 thanks alot madangler that is the sort of decisive answer i was hoping for , you are a legend :worthy:

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.