Hotpoint AQXXL129piuk

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Hotpoint AQXXL129piuk

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • July 13, 2010 at 2:38 pm #55810
    allan73
    Participant

    Can anyone advise on this fault, power to main board but nothing lighting up on display ?
    Display board looks ok & checked wiring from under lid up to display board, is this likely to be main board ?

    July 13, 2010 at 5:29 pm #325221
    johnnyj
    Participant

    Re: Hotpoint AQXXL129piuk

    Had a coupl of display boards going duff, i usual plug in another wf display board or similar to confirm if it lights up.

    July 13, 2010 at 6:34 pm #325222
    allan73
    Participant

    Re: Hotpoint AQXXL129piuk

    This m/c is an aqualtis Johnny with the display board in the door, can I plug a wf board in to see if it lights up ?

    July 13, 2010 at 6:54 pm #325223
    johnnyj
    Participant

    Re: Hotpoint AQXXL129piuk

    Yes i unplug the plug to the display board and plug in another only takes a couple of minutes. JJ

    July 14, 2010 at 6:06 am #325224
    allan73
    Participant

    Re: Hotpoint AQXXL129piuk

    Thanks for the help 8)

    July 16, 2010 at 11:39 am #325225
    allan73
    Participant

    Re: Hotpoint AQXXL129piuk

    Thanks again Johnny, it was the display board ❗

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.