Hotpoint auto WF860

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Hotpoint auto WF860

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • December 6, 2007 at 3:45 pm #32795
    senseib
    Participant

    This m/c is indicating fault f-11. I’ve changed the pressure stat, checked the pump is ok and the solenoid valves are ok, all to no avail 🙁

    Even tried another power module from EMW – still flashing F-11 😕

    Can anyone help?

    Brian.

    December 6, 2007 at 7:42 pm #236422
    HotDog
    Participant

    Re: Hotpoint auto WF860

    Have you checked sump for blockage

    December 6, 2007 at 10:16 pm #236423
    senseib
    Participant

    Re: Hotpoint auto WF860

    Yep! wired the pump independently to check its ok, pumped out fine 😥

    Brian.

    December 7, 2007 at 1:21 pm #236424
    senseib
    Participant

    Re: Hotpoint auto WF860

    SORTED IT – BROKEN CABLE TO PUMP!!! 👿

    Brian.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.