Hotpoint BCi45C wiring loom

[cornwell40]

God I hate these. 😈
Fitted a board in September last year, dispenser getting permanent feed and buzzing like a goodun. Fitted board and away it went.
Now she complains of no drain. Get down there and the thing drained fine but buzzed like a b****rd 👿 .
Took door off and board is burned out at the dispenser connection end and the connectors in the plug are iffy as well….poor contact/ burned..
Anyone know of the part number for the wiring loom or (god forbid) if the large loom plug comes as a separate item. I’ll have to stump up for the board but not taking any chances with the connections.

Tony

[iadom]

Re: Hotpoint BCi45C wiring loom

There is a picture of a loom on Partfinder, item No: 9, sadly it does not appear in the available parts list. 😥

A part number for the harness is available for a BCI45 and also for a BCI450, different numbers though. :rolls:

Actually there dosen’t appear to be a BCI45.C, there is a BCI450.C thats the one with no part number listed.

The dreaded C means its a Chinese pile of poop.

NB. The price of the harness for a BCI450 is listed at over £72.00 ex vat, the other one is over £83 ex vat, are you sure you want one. 😉

Jim.

[BobHope]

Re: Hotpoint BCi45C wiring loom

can not see model BCI45C but there is a BCI45 and the loom part no is C00093684, com code for correct id would be helpfull.

Bob.

[cornwell40]

Re: Hotpoint BCi45C wiring loom

thanks for your input, Gents.
I knew this was going to be painful :rolls:
As usual this machine is built in with the door tight up to the left hand wall (bespoke kitchen :rolls:). I could just make out the model number with a mirror but looks like I’ll have to return with my FBH to have a look at the
codes.

Tony

[Author]

Posts