Hotpoint BFV 62 Fills Then Pumps Out

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Hotpoint BFV 62 Fills Then Pumps Out

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • January 30, 2007 at 6:45 pm #24629
    Turbo
    Participant

    This built in dishwasher fills then pumps out before the wash pump has a chance to kick in. After the water has pumped out the second light in from the left flashes. There is no signs of a leak from the motor, the base looks like new. However the insulation reading on the mains plug is less than 1 Meg ohms. Not dragged it out yet. Any suggestions would be helpful.
    Thanks Turbo

    January 30, 2007 at 7:51 pm #202716
    msappliance
    Participant

    Re: Hotpoint BFV 62 Fills Then Pumps Out

    Dont know much about them but is pressure switch ok

    January 30, 2007 at 8:00 pm #202717
    Turbo
    Participant

    Re: Hotpoint BFV 62 Fills Then Pumps Out

    Gently blew down pressure switch, 1 click, seemed ok to me.
    Thanks Turbo

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.