hotpoint BMW929

[machineman]

Dead as a dodo .mains coming in other than that dead .are the boards on these prone to failure or am i missing something.m

[iadom]

Re: hotpoint BMW929

That model number is not recognised on Partfinder?

Could it be a BWM129. 😉 I think BMW is a car or a motorbike. 😀

PCB’s can give this fault but worn motor brushes/duff motor will also cause this.

Jim.

[hotpnt]

Re: hotpoint BMW929

not uncommon to go to these dead, board im afraid!

[iadom]

Re: hotpoint BMW929

hotpnt, does this always require a new board or can you use your lappy to reprogramme the eeprom for this fault. EMW are reporting an increase in this type of board failure on very late model Indesit/Hotpoint/Ariston machines.

Jim.

[hotpnt]

Re: hotpoint BMW929

new board time!,

[machineman]

doyou know the part No for the mod.m

[iadom]

machineman wrote:doyou know the part No for the mod.m

If you can confirm the ‘correct’ model number and possibly serial number. 😉

Or you could EMW your BMW . 😆
Jim.

[machineman]

sorry jim,its a bwm 129 serial No 701187815.m

[iadom]

Re: hotpoint BMW929

Personally I would get this off to EMW for a repair, this one should have 3 phase motor and it has a couple of different modules, one around £74.00 + vat list, the other over £93.00 + vat. And that is without eeprom. Looks like yours is the latter. 😥

EMW are repairing these boards now. Around £40.00 + vat.

Make sure you leave the machine unplugged for 10 minutes before touching it. 😯

Jim.

[machineman]

thanks Jim

[Author]

Posts