Hotpoint BSI620 help required please

[robdray]

The loom has fallen off the PCB … 2 wires / cables to re attatch … 1x pink and 1x double which is blue & brown in one tag … please can someone advise me where they should be going … 1x goes to STB4 and the other goes to STB2 … (printed on the board) … but I need to know which goes to which … all help accepted … cheers gents.

[mutley]

Re: Hotpoint BSI620 help required please

Looking at the circuit diagram it appears that the double connector goes to the terminal marked F1 and the single goes to F2,
hope this helps

[robdray]

Re: Hotpoint BSI620 help required please

Is there any chance I could get a copy of the circuit diag … really greatful for the help but the diag would really help ? Can PM you with a fax number or an e mail address …

[robdray]

Re: Hotpoint BSI620 help required please

Mutley … please note that this request was posted by me, on behalf of a new user … “gordonn” … he may well pm you or post further requests … thanks for your help on this one … Rob

[iadom]

Re: Hotpoint BSI620 help required please

Just out of curiosity, is it a BS1620 or a BSI620, I can find neither on Partfinder. ❓

[Author]

Posts