Hotpoint CTD40 – Flashing Lights

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › Hotpoint CTD40 – Flashing Lights

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • December 7, 2008 at 11:34 pm #41674
    sparkymark75
    Participant

    I have one of these tumble dryers and it’s now got a fault whereby the following lights begin to flash after it’s been in operation for about 30 minutes.

    Time Delay
    Pre Creasecare
    High Heat
    Alarm

    The On/Off light also flashes but a lot more slowly than the other four. Any ideas what this indicates?

    December 8, 2008 at 12:06 am #270956
    Penguin45
    Participant

    Re: Hotpoint CTD40 – Flashing Lights

    Heater relay jammed in the closed position. Please buy a decent dryer.

    Penguin45.

    December 8, 2008 at 2:08 pm #270957
    sparkymark75
    Participant

    Re: Hotpoint CTD40 – Flashing Lights

    Penguin45 wrote:Heater relay jammed in the closed position. Please buy a decent dryer.

    Penguin45.

    LOL, thanks.

    This is the third problem in just over a year so I’m seriously considering it. Any recommendations on a decent condensing tumble dryer which isn’t too expensive.

    In the meantime, is this user resolvable?

    December 8, 2008 at 3:11 pm #270958
    helo_75
    Participant

    no, it needs a pcb.. and an eprom/smarcard

    go buy a zanussi, about the best there is

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.