Hotpoint CTD85 NTC or not NTC

[allan73]

This beast is coming up F-13 after a few seconds, ntc is not open but reads 333 ohms at room temp (ohms not kohms). Am I correct in thinking the reading should be alot higher ? Also the display constantly flickers but I think that’s a side issue.

Allan.

[iadom]

Re: Hotpoint CTD85 NTC or not NTC

• Check security of module connector J4;
• Test from J4 connector pins 1 and 2 (approximately 500
Kohms);

[allan73]

Re: Hotpoint CTD85 NTC or not NTC

Thanks Jim, I’m only getting 333ohms across the rear ntc so I guess it’s shot ❗

Allan.

[iadom]

Re: Hotpoint CTD85 NTC or not NTC

Info is actually, HERE 😉

Jim.

[Author]

Posts