HOTPOINT D/W BCI450

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › HOTPOINT D/W BCI450

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • March 5, 2009 at 9:43 am #43973
    richardable
    Participant

    fully integrated d/w. select any program, water in, water drains at same time. d/w bleeps and ALWAYS defaults to ECO wash…neon flashes. d/w stops. any clues ?
    richard

    March 5, 2009 at 7:03 pm #279274
    deltra
    Participant

    Re: HOTPOINT D/W BCI450

    base flooded, ❓ (overfilled, new tablets?)

    March 5, 2009 at 7:17 pm #279275
    iadom
    Moderator

    Re: HOTPOINT D/W BCI450

    Always best to give the flashing light by number Richard.

    If Eco is light 3 then it is supposed to be a faulty inlet valve but my money would be on an O/C or down to earth heater.

    Jim.

    March 6, 2009 at 4:08 pm #279276
    richardable
    Participant

    Re: HOTPOINT D/W BCI450

    jim, thanks, ECO is 3 from the left….if it fills ok then can i assume the inlet valve is ok? and i will chase the earth/heater possibility.
    richard

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.