Hotpoint DF23 Dish Washer

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Hotpoint DF23 Dish Washer

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • February 23, 2010 at 5:03 pm #52732
    mike100
    Participant

    Always sticks in same place after 5 when it is rinsing. It drains then heater comes on and it sticks. Put in new timer but just the same.
    There are 2 different thermostats underneath, could these be the fault?
    Loom ok, and fill levels seem ok.
    Any ideas please.
    Mike

    February 24, 2010 at 8:55 pm #312905
    boselecta
    Participant

    Hi

    Previous posts would suggest its the water level system, as I have told you I don’t remember working on this machine myself.
    good luck

    follow this link:

    http://www.ukwhitegoods.co.uk/modules.p … light=df23

    February 24, 2010 at 9:58 pm #312906
    mike100
    Participant

    Re: Hotpoint DF23 Dish Washer

    Thanks bose will check out

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.