Hotpoint dishwasher fault LFT114UK

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Hotpoint dishwasher fault LFT114UK

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • December 20, 2016 at 4:43 pm #90171
    lyndy
    Participant

    Have been out to a customer’s dishwasher twice now after they reported it kept sticking during the cycle. The first time we visited we re-set the programme and tested it but it did not fault again. The second time we visited, we replaced airbreak turbine and this seemed to resolve the problem when we tested it. The customer has called again to say the fault has appeared again. We’re now thinking it could be the electronic but does anyone have any other thoughts?

    The machine fills, locks out and then drains. There is no power getting to the circulation pump but continuity through the pump itself.

    Thanks in advance.

    December 20, 2016 at 5:20 pm #443933
    iadom
    Moderator

    Re: Hotpoint dishwasher fault LFT114UK

    Plenty of thoughts, all negative sadly. I can send you the manual if you PM me an e mail address.

    Jim.

    December 21, 2016 at 1:54 pm #443934
    lyndy
    Participant

    Re: Hotpoint dishwasher fault LFT114UK

    Hi Jim,
    Our email is
    If you can help that would be great.
    Thanks
    Lyndy

    December 21, 2016 at 2:23 pm #443935
    iadom
    Moderator

    Re: Hotpoint dishwasher fault LFT114UK

    Done. Have removed your e mail address from your post, just in case. 😉

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.