Hotpoint DWF 30

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › Hotpoint DWF 30

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • September 1, 2005 at 8:19 pm #11735
    shadwell36
    Participant

    Machine leaves small amount of water in bottom at the end of the cycle.
    Works OK appart from this. Filters appear clear.Any ideas

    September 1, 2005 at 9:30 pm #146442
    Dave_Conway
    Participant

    Re: Hotpoint DWF 30

    Check the waste hose where it connects to the sink trap (if it does). These are notorious for blocking up 🙂

    Dave.

    September 3, 2005 at 10:39 am #146443
    Washman
    Participant

    Re: Hotpoint DWF 30

    Hi

    By small amount of water is it above or below the filter , Water below the filter is normal.

    Mike

    September 4, 2005 at 3:31 pm #146444
    shadwell36
    Participant

    Re: Hotpoint DWF 30

    There is about an inch of water above the square mesh in the bottom of the machine

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.