- This topic has 4 replies, 2 voices, and was last updated 15 years, 10 months ago by
.
-
Posts
-
Hello,i have a hotpoint fdl570 dishwasher, it was working fine last time i used it. Just over a year old. When i turned power on to the machine the salt, rinse aid and wash light are flashing and there is a humming noise coming from the machine. I have turned it off and on again over the past week and the same happens.
Any ideas would be great, thanks
Re: Hotpoint fdl570
F01, leak into base.
Unplug and tip the machine to one side. If water runs out then it has a flooded base.
This can be caused by oversoaping or an internal leak, stop using multi tabs for the first one, identify and cure for the second one.
Re: Hotpoint fdl570
There has been water come out of the bottom. If i take it apart will it affect my parts gurantee.
Re: Hotpoint fdl570
It depends how careful you are. 😉
With a labour charge of £105 they are not going to argue too much if they are getting that amount of money out of you. 😥
- You must be logged in to reply to this topic.