Hotpoint FDW 20.

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Hotpoint FDW 20.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • April 20, 2007 at 8:55 pm #26780
    ChrisR
    Participant

    Hi guys.

    This dishwasher fills then goes to pump out within 30 seconds and the first and second indicator lights flash.

    Fault supposed to be a blocked filter but everything seems clear.

    Any suggestions.

    Cheers.

    Chris.

    April 21, 2007 at 10:12 am #211354
    Galway
    Participant

    Re: Hotpoint FDW 20.

    are lights 1 and 2 or F12 not a communication error?lights 1,3&4 are pump/drain error i think.hope this helps.

    April 21, 2007 at 4:00 pm #211355
    iadom
    Moderator

    Re: Hotpoint FDW 20.

    1+2 is a drain time out error, or a software recognition error. Can be either.

    Jim.

    April 25, 2007 at 7:46 pm #211356
    ChrisR
    Participant

    Re: Hotpoint FDW 20.

    Thanks for replys guys 😀

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.