Hotpoint FDW60 dishwasher. Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Hotpoint FDW60 dishwasher. This topic has 6 replies, 6 voices, and was last updated 17 years, 6 months ago by ChrisR. Viewing 7 posts - 1 through 7 (of 7 total) Author Posts October 1, 2008 at 7:10 am #39864 ChrisRParticipant Hi. Can anybody tell me why the top spray arm won`t go round when washing on this dishwasher. Everything seems ok except top arm worn and wobbles a bit. There seems sufficient pressure thru` the duct to the arm but it won`t turn.Bottom arm is fine. There are no obstructions or obvious blockages. Any ideas?. Thanks. Chris. October 1, 2008 at 7:28 am #263917 grazzamongrelParticipant Re: Hotpoint FDW60 dishwasher. chance are that you either have a faulty circulation motor or lower spray arm October 1, 2008 at 7:36 am #263918 bzz67Participant Re: Hotpoint FDW60 dishwasher. i think this machine has a water diverter on the circ pump, maybe a fault there. October 1, 2008 at 7:46 am #263919 MartinParticipant Re: Hotpoint FDW60 dishwasher. ChrisR wrote:There seems sufficient pressure thru` the duct to the arm but it won`t turn. New top spray arm and upper feed pipe maybe? October 1, 2008 at 7:46 pm #263920 ChrisRParticipant Re: Hotpoint FDW60 dishwasher. Thanks for the replys. 😀 December 9, 2008 at 1:55 pm #263921 scotsParticipant Re: Hotpoint FDW60 dishwasher. Having the same problem, upper spray arm not rotating, water comming out but not very powerful. I suspect the half load valve, but this only comes with a complete wash motor. Anyone else had this problem Brian December 10, 2008 at 9:36 pm #263922 HotDogParticipant Re: Hotpoint FDW60 dishwasher. faulty ring nut seal were upper spray arm locates on back Author Posts Viewing 7 posts - 1 through 7 (of 7 total) You must be logged in to reply to this topic. Log In Username: Password: Keep me signed in Log In