- This topic has 2 replies, 2 voices, and was last updated 13 years, 6 months ago by
.
Viewing 3 posts - 1 through 3 (of 3 total)
-
Posts
-
FDW60 set prog, it fills up and light comes on but it doesnt do anything, no drain pump action, tried new mains filter, heater and drain pump. Any other ideas please? Thanks Kez
Re: Hotpoint FDW60 Dishwasher wont start
The drain pump is routed through the main circulation pump on certain models, if the main motor is O/C then it will not drain either.
Viewing 3 posts - 1 through 3 (of 3 total)
- You must be logged in to reply to this topic.