Hotpoint FDW80

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Hotpoint FDW80

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • November 14, 2008 at 8:36 pm #41042
    knobs
    Participant

    Just a quick note…Hotpoint FWD 80 Dishwasher,customer complained of A10 fault code.(water valve triac)
    when i got there i found that the 4 uf capacitor on the wash pump was faulty. so no pump action.dont know if anyone has had the same fault ?

    November 16, 2008 at 8:20 am #268595
    grazzamongrel
    Participant

    Re: Hotpoint FDW80

    isnt a10 a hetaer fault??

    November 17, 2008 at 6:42 pm #268596
    knobs
    Participant

    Re: Hotpoint FDW80

    No, on the known error codes list its water triac (call an engineer) .
    Anyway,the machine works ok now,

    November 18, 2008 at 5:44 pm #268597
    grazzamongrel
    Participant

    Re: Hotpoint FDW80

    good

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.