Hotpoint FF200EP Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Hotpoint FF200EP This topic has 2 replies, 2 voices, and was last updated 10 years, 7 months ago by don. Viewing 3 posts - 1 through 3 (of 3 total) Author Posts August 19, 2015 at 7:32 am #85865 donModerator Help please with this one 😀 The above fridge freezer is too cold and builds up an ice ball after a couple of weeks which in turn stops the air from ducting up into the fridge. We have replaced the module, defrost heater modification had been carried out by a previous company. Can anyone help please? Don August 19, 2015 at 10:40 am #429696 eastlmarkModerator Re: Hotpoint FF200EP looks like all bases covered there Don, would take a look at what the other company have done….. Just ‘cos it says it on the invoice does not mean all the parts have been fitted. August 19, 2015 at 11:06 am #429697 donModerator Re: Hotpoint FF200EP Thanks Mark, that thought did cross my mind as well 😉 Will talk to the engineer when he gets back. Don Author Posts Viewing 3 posts - 1 through 3 (of 3 total) You must be logged in to reply to this topic. Log In Username: Password: Keep me signed in Log In