Hotpoint FF92 Frost Free “P1” Error

[TeeMyob]

Hello!

I have attended a Hotpoint FF92 with an open circuit green freezer thermistor /sensor. But it is also showing “P1” on the display when switched on!

Can anyone shed some light on it?

I have searched the trade forums for this error to no avail. Also when searched on google it returns ukwhitegoods topics for the problem but when the link is clicked, it says “topic does not exist”.
Have we had a server failure?

™

[iadom]

Re: Hotpoint FF92 Frost Free “P1” Error

I have deleted your post in the 5 year old public forum thread.

Check your inbox. 😉

[TeeMyob]

Re: Hotpoint FF92 Frost Free “P1” Error

iadom wrote:I have deleted your post in the 5 year old public forum thread.

Check your inbox. 😉

Inbox Empty!

😥

[iadom]

Re: Hotpoint FF92 Frost Free “P1” Error

Give it a chance. :rolls: 🙂

P1 does not appear to be a recognised error code.

[TeeMyob]

Re: Hotpoint FF92 Frost Free “P1” Error

Have given it chance but still nothing in inbox!

P1 is not an error then?

™

[iadom]

Re: Hotpoint FF92 Frost Free “P1” Error

Sent again, is the e-mail address in your posts ‘live’ thats the one I sent it to and last nights attempt at sending has not bounced back.

Jim.

[TeeMyob]

Re: Hotpoint FF92 Frost Free “P1” Error

Have given it chance but still nothing in inbox!

P1 is not an error then?

™

[iadom]

Re: Hotpoint FF92 Frost Free “P1” Error

Is the e-mail in your posts and profile dead. Its the City Cooling talk talk . net one.

Both e-mails I have sent have gone without any problems.

If you have another e-mail address then send me a PM and I will send it to that.

There are no P error codes mentioned in the manual.

Jim.

[TeeMyob]

Re: Hotpoint FF92 Frost Free “P1” Error

iadom wrote:Is the e-mail in your posts and profile dead. Its the City Cooling talk talk . net one.

Both e-mails I have sent have gone without any problems.

If you have another e-mail address then send me a PM and I will send it to that.

There are no P error codes mentioned in the manual.

Jim.

Hello Jim

Yes the talktalk one and has come through. My apologies, when you said “inbox” I understood this to mean the PM inbox.

Have had troubles with TT but all sorted now. .pdf recieved

Many thanks for your kind help and assitance

™

[pup]

Re: Hotpoint FF92 Frost Free “P1” Error

Hi jim hope you ok ,can you pls send me one as well ta i got one which is right pig haveing chanege both sensor and fan motor fridge is not holding temp goes too hot say 20 plus and then back to 3/4 have clean and check cooling fan check that flap thingg in firdge

[iadom]

Re: Hotpoint FF92 Frost Free “P1” Error

On its way Umed. 🙂

[pup]

Re: Hotpoint FF92 Frost Free “P1” Error

thanks jim 😆

[Author]

Posts