Hotpoint frost free Mod – 8596 – Service manual Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Hotpoint frost free Mod – 8596 – Service manual This topic has 8 replies, 6 voices, and was last updated 19 years, 11 months ago by walnut. Viewing 9 posts - 1 through 9 (of 9 total) Author Posts May 14, 2006 at 7:53 pm #17807 walnutParticipant Looking for a Service manual for a Hotpoint 8596 fridge freezer. Any help gratefully received. May 14, 2006 at 8:01 pm #176471 Dave_ConwayParticipant Re: Hotpoint frost free Mod – 8596 – Service manual If no-one has a copy to hand it’s part number 5400460 from Hotpoint, about £16 though 🙁 Dave. May 15, 2006 at 8:21 am #176472 abbotsParticipant Re: Hotpoint frost free Mod – 8596 – Service manual is this the old ocean made machine? i have a manual for the 8595,what info. do you need? john May 15, 2006 at 1:47 pm #176473 walnutParticipant Re: Hotpoint frost free Mod – 8596 – Service manual John, I’m looking to build a test rig for the PCB so I need a wiring diagram, values of the Temp sensors resistance etc. The two PCB’s I’am working on have damage to the board from 3 x 330 ohm resistors that look to be over heating. May 15, 2006 at 2:18 pm #176474 abbotsParticipant Re: Hotpoint frost free Mod – 8596 – Service manual no worries,the 8595 will be different then. sorry,can’t help you. john May 15, 2006 at 5:29 pm #176475 mike412Participant Re: Hotpoint frost free Mod – 8596 – Service manual This is the early Mistral Model and I have The full manual. Do you need all 30 pages or Just fault dagnosis and circuit diagrams (6 pages )?. Mike. May 15, 2006 at 9:21 pm #176476 walnutParticipant Re: Hotpoint frost free Mod – 8596 – Service manual I’am still learning how these frost free fridges work, If you could email all 30 pages that would be great. May 15, 2006 at 9:27 pm #176477 Simon46Participant Re: Hotpoint frost free Mod – 8596 – Service manual The board is usually darkened in this area. Have they charred it? Have you searched the postings under mistral or 8596? plenty of info there. 🙂 Regards S. May 17, 2006 at 4:49 pm #176478 bobokinesParticipant Re: Hotpoint frost free Mod – 8596 – Service manual Walnut, I have sent you a copy of the manual for the ff71 range. I think that you will find that the wiring diagrams are the same Bob Author Posts Viewing 9 posts - 1 through 9 (of 9 total) You must be logged in to reply to this topic. Log In Username: Password: Keep me signed in Log In