- This topic has 2 replies, 2 voices, and was last updated 10 years, 2 months ago by
.
Viewing 3 posts - 1 through 3 (of 3 total)
-
Posts
-
Hotpoint hvf344 uk fills starts washing then looses power (machine stops and display turns off) checked connections to board all ok. After turning machine off at socket and turning it back on machine lights up and can be reset again and set away then same thing happens. I’m wondering if it’s a pcb problem but don’t know if it’s the main pcb or the display pcb any help appreciated
DarrenRe: Hotpoint hvf344 uk
sound like a pcb power supply fault
if your not good at electronics send both boards to EMW they will check and repair as a pair
Dave
Viewing 3 posts - 1 through 3 (of 3 total)
- You must be logged in to reply to this topic.