Hotpoint LST 216 A Dishwasher problem

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › Hotpoint LST 216 A Dishwasher problem

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • January 21, 2020 at 11:03 am #97080
    yenotsneb
    Participant

    Hello!

    Our dishwasher was being extremely noisy last week and not washing properly. I replaced the wash pump motor and it seems to have fixed the problem – it’s no longer noisy and has done one wash successfully. However, towards the end of the cycle, it seems to have encountered a problem – an error light is flashing (the power LED and the first on the row of LEDs) and it won’t switch off (If I do switch it off, it switches itself back on and continues flashing the LEDs). It occasionally makes a sound as if it’s trying to do something – maybe draining?

    Any suggestions very welcome, thanks!

    January 21, 2020 at 11:46 am #466020
    iadom
    Moderator

    Could be a slight leak into the base after your repair.;)

    January 21, 2020 at 11:52 am #466021
    yenotsneb
    Participant

    I did wonder about that… I’ll have a look!

    January 21, 2020 at 3:29 pm #466022
    yenotsneb
    Participant

    Spot on – I discovered a small puddle in the baseplate. Tightened the hoses some more, hopefully that’ll do it. Thanks so much!

    January 21, 2020 at 5:21 pm #466023
    yenotsneb
    Participant

    Hmmm… it’s happened again. I’m assuming it’s still got a leak. I’ll have a look!

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.