Hotpoint M58 faulty

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › Hotpoint M58 faulty

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • August 5, 2012 at 2:32 pm #70804
    shazbatt
    Participant

    I have a Hotpoint M58 Aquaries, I load and set the programme,the machine fills with water, I hear three clicks then nothing happens,it will not spin, the drum does not revolve. I can onlyget it to fill and empty, any suggestions please?

    August 5, 2012 at 6:55 pm #379021
    iadom
    Moderator

    Re: Hotpoint M58 faulty

    shazbatt wrote: any suggestions please?

    Yes, post up a proper model number from the front of the machine or better still from the rating plate from inside the door first. 😉

    August 5, 2012 at 8:30 pm #379022
    shazbatt
    Participant

    Re: Hotpoint M58 faulty

    Sorry model no is WMA58P

    August 5, 2012 at 8:57 pm #379023
    iadom
    Moderator

    Re: Hotpoint M58 faulty

    THIS would be a good place to start, be sure to remove the mains plug first.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.