Hotpoint main oven diamond regulator C00229478

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Hotpoint main oven diamond regulator C00229478

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • November 9, 2010 at 6:34 pm #58711
    Micky 32
    Participant

    Does anyone have the pinouts for this switch?

    November 9, 2010 at 8:27 pm #335390
    keithwilliams
    Participant

    Re: Hotpoint main oven diamond regulator C00229478

    you might have the same problem that is ongoing for me. i bought a thermostat and wired everything up as was and BANG!!! the consequential damage was ridiculous. i was advised later that the terminals had been changed in the later stat but the was NO info with the part. i’ve tried and tried in vain to get a wiring diagram for the cooker, even the hotpoint engineers haven’t got one.
    so if its the same i wouldn’t hold out much hope.
    keith

    November 9, 2010 at 11:47 pm #335391
    Micky 32
    Participant

    Re: Hotpoint main oven diamond regulator C00229478

    Done one of these before and took a while to figure out properly. Anyway looking at the net it seems A is the line in from the timer and B is the element ( so A and B are the thermal switch) so A to C is a switch contact obviously for the fan. Fitting tomorrow in place of the older type switch so will report back if worked.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.