Hotpoint SDL510

[AdrianC]

Hi. This is my first post.

I need a help with my dishwasher Hotpoint SDL510.
I start cycle, it’s taking a water, then I can hear dishwasher tablet is realised.
Then becomes noisy and Lights 6h, 9h and START/PAUSE LIGHT flashing.
Please see video below.

https://linksharing.samsungcloud.com/okbfdg961zeC

Please ,anybody can read this fault code for me as Hotpoint CS has been unhelpful.

Many thanks
Adrian

[iadom]

Should be the same as these, use the position/number of each light to identify. Three vertical lights are 1,2,3. The start/pause is light 4.

https://www.ukwhitegoods.co.uk/help/…er-fault-codes

Sadly the main circulation pump is prone to failure on these Indesit made appliances and would give the symptoms you describe.

NB. The sequence you are giving is lights 2+3+4, this not a recognised error code.

[AdrianC]

Hi iadom,

I can’t upload a photo but I read fault code.
Lights flashing are:
1(wash)
3 (end )
4 ( start/ PAUSE)

It’s sems to be FAULT CODE E10

Lights are horizontal on my dishwasher.

What do you think and where can I order parts?

Many thanks
Adrian

[iadom]

That’s E11, supposed to be a faulty main module. That failing would not cause any noises, the main circulation pump is still the likely cause of your fault. Either way those parts are very expensive and the module needs to be programmed as well.

If another trade member has the exact SDL codes hopefully they can confirm.

[electrofix]

this may help better

Dave

[AdrianC]

Thanks Dave. This is very clear. 1+3+4 Non operative module. This is my 3rd Hotpoint appliance which is going to scrap.

Never more.

Thank you guys for your help.

[iadom]

All three almost certainly Indesit made appliances behind the badge.:(

[Author]

Posts