Hotpoint stuck in spin.

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Hotpoint stuck in spin.

Viewing 10 posts - 1 through 10 (of 10 total)
  • Author
    Posts
  • April 28, 2009 at 6:11 pm #45309
    spark
    Participant

    A HLV 200 stuck in spin
    Any help on this would be appreciated. 😕

    April 28, 2009 at 6:20 pm #285255
    iadom
    Moderator

    Re: Hotpoint stuck in spin.

    Are you sure about that model number, nothing like it on Partfinder. ❓

    Jim.

    EDIT. Just checked, it must be an HVL200. 😉

    Its a 100{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} Indesit machine, bound to be the PCB. 😥

    I will send you a little something. 😉

    April 28, 2009 at 6:34 pm #285256
    spark
    Participant

    Re: Hotpoint stuck in spin.

    Many thanks iadom.
    It is indeed a HVL.

    April 30, 2009 at 6:14 pm #285257
    Tony_EMW
    Participant

    Re: Hotpoint stuck in spin.

    Careful with this one. Heater faults also cause these boards to stall at different postions, even on spin. On digital display machines, they often count down to 1 minute and stay there. Change the heater and they work ok.

    May 2, 2009 at 3:32 am #285258
    spark
    Participant

    Re: Hotpoint stuck in spin.

    Thanks Tony,I’ll check that.
    Machine has seen some hard work and replacing the PCB would not be justified.
    Do you need my email address iadom? 😉

    May 2, 2009 at 2:59 pm #285259
    iadom
    Moderator

    Re: Hotpoint stuck in spin.

    You should have received it at the time I posted, assuming the e-mail you registered is live. 😉


    Let me know if you want it re sending.

    Jim.

    May 3, 2009 at 2:59 am #285260
    spark
    Participant

    Re: Hotpoint stuck in spin.

    Sorry iadom that address is gone.
    Present one is irmike@eircom.net
    Trying to avoid the spammers.

    May 4, 2009 at 2:28 am #285261
    spark
    Participant

    Re: Hotpoint stuck in spin.

    Iadom, I am absolutely delighted with the info you sent me.
    As I’ve said on this forum before, I come from the mechanical programmer era and never got fully to grips with the digital one.
    However, I “take a look “at family and friends appliances and with the assistance of your excellent forum I’ve had many successes. (Makes me think of going back to it despite age etc)
    With info like this the task doesn’t seem that daunting.
    Sincere thanks: spark
    😀

    May 6, 2009 at 9:35 pm #285262
    Micky 32
    Participant

    Interesting. My next door neighbour has a WF type machine( didn’t look at the mod number) but has a didital display and tonight it was stuck on spin with a minute showing. I reset it and it worked ok. It happened once a few months ago also and when i reset it was ok until now.

    Iadom, can you send me some of that info please? email iguana30ie@hotmail.com

    May 6, 2009 at 10:02 pm #285263
    iadom
    Moderator

    Re: Hotpoint stuck in spin.

    The info I sent was specific to just one machine, the HVL 200 in this instance.

    If ever you get any problems just ask and I will see what I can do. 😉

    Jim.

  • Author
    Posts
Viewing 10 posts - 1 through 10 (of 10 total)
  • You must be logged in to reply to this topic.