Hotpoint T/drier 9326…need a cut out!

[laurenceuk]

Hi,

Partfinder shows the heater to be obselete. I need a thermal cut out for this machine and they are not shown on the diagram. There are two connected in series and mounted in a plastic holder, one above the other, adjacent to the heater.

Are they still available? Are they the same temp? And if not available is it reasonable to remove the link between them and just have the one in the line?

They are not Otter cut outs and are about half the thickness.

Laurence

[Dave_Conway]

Re: Hotpoint T/drier 9326…need a cut out!

They’re shown on a seperate diagram than the heater for some reason.

Part numbers – 1700193 and 1700178 and still available 😀

Dave.

[iadom]

Re: Hotpoint T/drier 9326…need a cut out!

Also available from Qualtex TOC18 130° stat & TOC19 150° one shot.

[laurenceuk]

Re: Hotpoint T/drier 9326…need a cut out!

Hi,

Thanks muchly for your help 😀

Laurence

[Author]

Posts