Hotpoint TCD970

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Hotpoint TCD970

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • August 25, 2014 at 12:04 pm #81958
    ChrisR
    Participant

    Hi Guys.

    Fitting a belt to one of these tomorrow but can’t remember how.

    Can anybody help?.

    Thanks.

    Chris.

    August 26, 2014 at 10:09 pm #418274
    boselecta
    Participant

    Re: Hotpoint TCD970

    Hi,
    I find the easiest method is to take the four bolts off the motor and tension the belt over the pulley with a large flat headed screwdriver in the motor housing.

    There are other ways to get the belt over the pulley but I have found this to be the easiest method by far, I believe this is the method Hotpoint engineers are advised to do.

    August 27, 2014 at 6:29 am #418275
    ChrisR
    Participant

    Re: Hotpoint TCD970

    Thanks very much for that and taking the time
    to answer.
    Chris.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.