- This topic has 1 reply, 2 voices, and was last updated 10 years, 9 months ago by
.
-
Posts
-
hello, when I put load on to dry. The pre care, post care , high heat, and the start/pause button are always flashing amber colour constantly. The clean condenser is always on red colour but doesn’t flash as does the drying and cool tumble button but is amber colour.
After 15mins or so tumble dryer beeps , that’s when I have to switch if off from the plug and restart it, clothes do dry but take forever after switching on and off. any ideas thanks.
Re: Hotpoint TCL770g Condenser flashing lights
The error codes are given by flashing all of the horizontal lights and lighting up ‘without flashing’ the bottom five vertical lights with the END light counting as 1 and the CLEAN FILTER light as 5.
The vertical lights you describe would correspond to lights 2,3 & 5 which is not a recognised error code. 😕
- You must be logged in to reply to this topic.