Hotpoint TCM65 condenser dryer

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Hotpoint TCM65 condenser dryer

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • April 9, 2010 at 11:33 am #53870
    nelson
    Participant

    I have been to this one today, customer reported that there was no heat, I tested the toc’s, heater and front stat all ok. This machine has a module on it and I am wondering if this could be the culprit.
    While I was there I switched the machine on, to test for current to the toc’s and heater, only to find it started to work. I stopped the machine put it onto an other dry cycle and got no power to the heater etc. I tried the machine on all the different settings and got nothing even the first one I had tried that had originally worked. I have had no dealings with this model before so I would appreciate any help offered. 🙂

    April 9, 2010 at 1:48 pm #317544
    iadom
    Moderator

    Re: Hotpoint TCM65 condenser dryer

    The dryness module is a possibilty, sometimes you can see signs of damage around the connector blocks or the relay joints.

    April 9, 2010 at 2:00 pm #317545
    nelson
    Participant

    Re: Hotpoint TCM65 condenser dryer

    I did inspect the module but couldn’t see anything obvious, I have checked the price on these, connect are quoting 62.64 + vat (not programmed) 🙁
    Does that mean I need a smart card etc to do this job?

    If yes……I’m out 😆

    April 9, 2010 at 3:24 pm #317546
    iadom
    Moderator

    Re: Hotpoint TCM65 condenser dryer

    They do not need programming, I think EMW have started doing these now, worth a phone call.

    April 9, 2010 at 6:19 pm #317547
    nelson
    Participant

    Re: Hotpoint TCM65 condenser dryer

    Cheers Jim, I’ll give Tony a ring on Monday

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.