Hotpoint Ultima WD860G

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Hotpoint Ultima WD860G

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • August 22, 2012 at 2:27 pm #71088
    PGS
    Participant

    Replaced main pcb due to overvoltage on supply and it accepted the smart card and confirmed by constant green light. I powered down then when I swiched appliance on I get F09, Do I try a new smart card or is there some sort of reset, cheers guys Paul.
    PCB pt no C00254298
    Card pt no C00271831

    August 22, 2012 at 2:46 pm #380004
    Criscold
    Participant

    Re: Hotpoint Ultima WD860G

    Unable to match part numbers on Hotpoint site http://www.hotpointservice.co.uk/hs/pag … ison_Table

    Colin

    August 23, 2012 at 7:34 am #380005
    PGS
    Participant

    Re: Hotpoint Ultima WD860G

    Correct part numbers now shown obtained from Hotpoint.

    August 27, 2012 at 8:24 am #380006
    PGS
    Participant

    Re: Hotpoint Ultima WD860G

    Ordered another smart card and hey presto. Spoke to one of our other guys who had same problem. Maybe a faulty batch ?

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.