Hotpoint Ultima WD865 wont start

[Mark1]

Hi all
Woder if anyone knows about these electronic Hotpoints. Seen one yesterday, cx says as soon as you select a programme and press start the machine goes into a test mode. It did flash up door 1st but only for a fraction of a second. I tested and replaced the door interlock and checked all connections on the main module, but no change. Possible module fault?
How do put these machines into a proper test mode and has anyone got any info on them? please help any info would be greatly appreciated. Thanks

Mark 🙂

[gcb]

Re: Hotpoint Ultima WD865 wont start

u need a hardware key its on partfinder2 £110 fae hotpoint this little baby works like a charm hope it helps bud

[Flyman]

Re: Hotpoint Ultima WD865 wont start

Is it coming up withn TEST on the display? If it is then check then check this http://www.ukwhitegoods.co.uk/modules.p … ic&t=12044

[hdltd]

try this first turn off machine from mains then turn back on hold down on/off and start cancel buttons together d off should appear on screen
hope this helps
john

[Author]

Posts