hotpoint washer WF3200

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #47929
    cornflakes
    Participant

    client has contacted me ref HOTPOINT WF3200


    says has had some problems with maching in so much as when switchinh on mains plug ALL LIGHTS ON CONTROL PANEL “FLASH” to clear problem usually by switching off power for 10 minutes, upon next power on machine is ok

    today the same problem is visable..BUT BY LEAVING MACHINE OFF FOR A PERIOD it does not clear problem when power is re-applied

    so basically all lights flashing on panel when swith on at socket

    any ideas most welcome

    unit is around 2 to 3 years old client thinks

    gracias

    Graham

    #295027
    iadom
    Moderator

    Re: hotpoint washer WF3200

    Alll lights flashing is usually a board fault.

    #295028
    suedehead1
    Participant

    Re: hotpoint washer WF3200

    had one last week board fault got one from emw sorted it out.

Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.