Hotpoint WD440

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Hotpoint WD440

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • June 25, 2008 at 10:46 pm #37653
    MDE
    Participant

    Hotpoint WD 440G, two in one day with the same fault {fo3 wash thermister} thermister and wiring seem ok, I have to assume PCB unless anyone can tell me something else to look for. Machines are two years old, triple valve fitted to each machine.

    Thanks Mark.

    June 26, 2008 at 8:06 am #255952
    A1engineer
    Participant

    Re: Hotpoint WD440

    usually is a board/eeprom fault m8.

    June 28, 2008 at 11:40 am #255953
    MDE
    Participant

    Thanks for your reply A1.

    Now can anyone give me part numbers for board and eeprom or do i need more information.
    Thanks Mark.

    June 28, 2008 at 1:23 pm #255954
    helo_75
    Participant

    more info please


    things to look for?

    hot/cold fill
    cold fill only (one valve)
    cold fill (2 valves)

    does it have a flushing valve on the back of the heater box?

    June 28, 2008 at 1:24 pm #255955
    helo_75
    Participant

    oh, and does the board have a j10 connection along the top edge or not?

    June 29, 2008 at 11:42 am #255956
    robbo1973
    Participant

    wd440

    hi i pinch the edge connectors on board and it has cured many faults inc one last week for a friends mam with this fault and all has been well since worth a try.

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.