Hotpoint WD51p noisy and lights flash

[robwash]

turned machine on spin and took a long time for door to lock and then the pump was noisy. motor didn’t move. I thought the door lock was playing up so fitted new interlock but the same thing. the door lock light/power light was pulsing. even plugged a new pump and same noise.
can anyone help a poor distressed engineer please???

[iadom]

Re: Hotpoint WD51p noisy and lights flash

The new pump was also noisy?

Have you got a wiring diagram to check the circuits to the motor, I assume you have already checked the motor itself ?

Jim.

[Martin]

Re: Hotpoint WD51p noisy and lights flash

robwash wrote:the door lock light/power light was pulsing.

Burnt out on/off switch maybe? 😉

[robwash]

Re: Hotpoint WD51p noisy and lights flash

Checked motor and ok. The on/off switch sounds realistic as it is taking time to lock the door switch. cheers will try that.

[timdowning]

Re: Hotpoint WD51p noisy and lights flash

Try plugging machine into another wall socket.

[robwash]

Re: Hotpoint WD51p noisy and lights flash

Thanks a lot. It was a burn’t out on/off switch. cheers

[Martin]

Re: Hotpoint WD51p noisy and lights flash

robwash wrote:Thanks a lot.

No probs :tup:

[Author]

Posts