hotpoint wd64

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › hotpoint wd64

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • January 22, 2007 at 6:23 pm #24380
    hilly
    Participant

    when dryer is set to come on after the wash it runs contiuously during the full cycle the only way i can stop the dryer is to turn it to the off position on the dryer timer. ive tried a timer from emw on it but no joy and ive tried a new dryer timer,

    any ideas thanks paul

    January 22, 2007 at 7:17 pm #201863
    Penguin45
    Participant

    Re: hotpoint wd64

    Got to be an earth leak somewhere on the dryer side.

    Chris.

    January 22, 2007 at 7:22 pm #201864
    bobokines
    Participant

    Re: hotpoint wd64

    Check for a chaffed wire on the wiring harness by the motor..

    Bob

    January 23, 2007 at 7:38 pm #201865
    hilly
    Participant

    Re: hotpoint wd64

    thanks for replies it was a chaffed wire on motor harness. tyipical i overlooked the simple thing 😳 😳


    cheers again, paul

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.