hotpoint wf000

This topic has 2 replies, 2 voices, and was last updated 15 years, 8 months ago by ddirect.

Viewing 3 posts - 1 through 3 (of 3 total)

Author

Posts
July 15, 2010 at 4:19 pm #55869

ddirect
Participant

help needed have a hotpoint wf000 starts to ramp up into spin then displaysfaul code light 3 = motor jammed/tacho. checked motor it is ok so fault must be on board, does anyone have any idea which part on board to replace or is it a case of just ordering a new one. thanks in advance, Darren.

July 15, 2010 at 5:41 pm #325400

billyblue
Participant

Re: hotpoint wf000

Can you just plug another motor in to eliminate it, then it must be the board or loose wires in motor plug.

July 15, 2010 at 6:10 pm #325401

ddirect
Participant

Re: hotpoint wf000

i know the motor is ok and i know its a board fault,what i want t know is has anyone had this problem and repaired the board themselve or is it a job for someone who refurbishes boards. all the same thanks for the reply
Author

Posts

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.