hotpoint wf240 sticking

[wilf]

13 month old hotpoint wf240 put on a wash prog fills to level then washes both ways for hours untill stopped. set to spin runs distribute speed only for hours set to drain runs to off about 2 mins. pressure switch ok heater ok insulatoin ok no option lights (error code) showing. test block at £100 plus a non starter just yet Ill wait to see if I get many more before I shell out.

any ideas?

wilf

p.s. Ive little confidence in these we sold about six and had to uplift three so stopped selling them.

[SDR]

Re: hotpoint wf240 sticking

check motor to module harness on motor plug especially, failing that replace the module and eeprom, they are prone to module failure .

[aqualectric]

Re: hotpoint wf240 sticking

Test the thermistor/s and associated wiring. As this is an In-de-s*it based machine it’s possible these can give you strange results on test. Best of luck!!

[Author]

Posts