HOTPOINT WF240P

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › HOTPOINT WF240P

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • November 18, 2008 at 6:13 pm #41124
    simonb
    Participant

    Computer board has blown up mark, looking on track side on bottom left had side quiet badly burnt, iv seen similar on indesits that is caused by dampness or water contamination? is it the same with this one? or any known shorts with componants?


    215007819.01
    46/04 mark 2.74
    0195125 up .06
    416c 20100

    Any help much appricated, thanks simonb

    November 18, 2008 at 6:15 pm #268879
    helo_75
    Participant

    might be worth checking the pump, thats the usual suspect

    November 18, 2008 at 6:30 pm #268880
    Penguin45
    Participant

    Re: HOTPOINT WF240P

    simonb wrote:Computer board has blown up mark

    What did mark do to deserve that?

    Chris.

    November 18, 2008 at 8:43 pm #268881
    smartin
    Participant

    Re: HOTPOINT WF240P

    😆

    November 19, 2008 at 10:47 pm #268882
    simonb
    Participant

    Re: HOTPOINT WF240P

    Yes very funny! ha! ha! 😳

    Hotpoint’s new just out of warranty built in timer
    “this machine will self distruct in 10 seconds and counting..”

    November 19, 2008 at 11:54 pm #268883
    Penguin45
    Participant

    Re: HOTPOINT WF240P

    I always used to think it was a cause and effect thing. Heater, motor to earth; chaffed wiring on the old ones (2 years plus…), or door locks. Now I just accept that the damn things do just blow.

    Chris.

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.