Hotpoint WF250

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Hotpoint WF250

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • August 4, 2006 at 4:22 pm #19681
    bzz67
    Participant

    I have come across a fault on a hotpoint washing machine, model wf250, 34187r, serial 502124564. the machine appears to work fine but the prewash lamp flashes throughout the cycle. originally the customer reported that the machine took about 9 hrs to complete the cycle. the water pressure is slow but allways has been. any ideas?????

    August 4, 2006 at 4:38 pm #184065
    Dave_Conway
    Participant

    Re: Hotpoint WF250

    In the know error codes page 4 near the bottom:

    http://www.ukwhitegoods.co.uk/modules.p … c&start=45

    Dave 🙂

    August 4, 2006 at 7:43 pm #184066
    roy1
    Participant

    I had a WF250 the other day that stuck on the program with the prewash light flashing, water had
    run into the machine off the work top and shorted the connector on the conditioner valve,and blown the high quality control board.
    The prewash light flashes for fill faults.

    August 9, 2006 at 11:10 pm #184067
    indespoint
    Participant

    Re: Hotpoint WF250

    Check the inlet valves are working guys. its a strange fault and not even in the manufacturers fault finding. Trust me I know from experience as I work for Hotpoint

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.