Hotpoint WF320 froze with odd light code

[MatMatMat]

My Hotpoint Aquarius WF320 froze yesterday, during the “Rinse & Spin” phase and is pretty unresponsive now.

I managed to get the clothes out and switched the machine off at the wall but when I turned it back on, I was presented with this:
http://imgur.com/YIgdzqh

I tried the “Start / Cancel” button to try and clear it but after all the lights came on, I was left with this:
http://imgur.com/S60jGd0

Those lights are constant; no flashing lights at all.

I’ve checked the pump cavity behind the kick board, blown down the pressure tube, and also had a visual inspection under the lid and behind the access panel on the back at the bottom and everything seems ok; all plugs appear secure in their sockets.

Any ideas would be welcome as I’m out!

Many thanks

[iadom]

Re: Hotpoint WF320 froze with odd light code

Not a recognised error code. Can be due to sticking buttons, happens if something has been spilt over the front.

Failing that it could be a fault in the control pcb or even the main power pcb in the base.

[Author]

Posts