Hotpoint WF321 wash enhance light flashing

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Hotpoint WF321 wash enhance light flashing

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • November 13, 2012 at 7:45 pm #72508
    cornwell40
    Participant

    Not flashing at normal code rate, it’s a fast flash with the mains on/off light constantly on. Can’t turn it off door won’t lock.
    Suspected PCB is duff, checked motor, brushes half way but enough on, test heater, voltage in the lot.
    Put in recon board from EMW it was still mid programme but couldn’t cancel so let it run through. Now both with both boards the same symptoms indicated. Door unlocked, mains light on wash enhance fast flash. Display board maybe or something more sinister ;-(.

    Anyone had this before??


    Tony

    November 13, 2012 at 9:58 pm #384717
    HotDog
    Participant

    Re: Hotpoint WF321 wash enhance light flashing

    have you tried a new lock

    November 13, 2012 at 10:09 pm #384718
    madangler1
    Participant

    Re: Hotpoint WF321 wash enhance light flashing

    Funny I had a display board on the 3 knob board ending in 616 doing strange stuff this week. Could not start or stop program’s,turn on or anything.

    I also went for the bottom board first but it ended being the top one.

    November 15, 2012 at 11:38 pm #384719
    cornwell40
    Participant

    Re: Hotpoint WF321 wash enhance light flashing

    top board cleared it, Gents.

    Tony

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.